Send us a sketch or drawing of your application requirements. We’ll make a sensor configuration drawing for your review. Email sensors@philtec.com
Archive | High Temperature RSS feed for this section
SENSORS for 400°C
CUSTOMER FEEDBACK
“We just got some feedback about the 9 sensors with special configuration and copper sheathing. They are quite satisfied by the sensors, which are well resisting against the 400°C. They have done several tests and measurement campaigns in laboratory and on flight.”
THE APPLICATION
Philtec has delivered 9 sensors to be used during helicopter flights to measurement displacement of engine components. The sensors have 40 mm displacement range and are designed for 400°C continuous tip exposure.
The sensors are equipped with the following options:
Option B – Connectorized Probe
Option C9 – Bendable Copper Cable Jacket, Part B
Option E2 – 3 m total fiber cable length
Option P – Polynomial Curve Fits
Option Q – Connectorized Power Supply and BNC Outputs
Option T6 – Custom 90° Tip with Threaded Probe Extension
Option T9 – 400°C High Temperature Probe Construction
1000°F Application
CUSTOMER FEEDBACK
“I wanted to let you know the sensors worked as designed during our tests. I may follow up with Chris on a few specific questions as we begin to sift through all of our data. Thank you again for your professionalism and for all your support.” … Sincerely, VMR, Mechanical Engineer
THE APPLICATION
Five special right angle probes were delivered for a 1000°F tip exposure test.
